*PLEASE NOTE THE SPECIAL EDITION CAN IS ONLY TEMPORARY AND IS THE EXACT SAME PRODUCT*

Wurth HHS 2000 Lubricating Oil is partly synthetic oil that is extremely resistant to high pressures.

It provides an extraordinarily tear-proof lubricating film with excellent noise and vibration dampening.

Good creep properties, excellent lubricating properties for small gaps and provides super reliable protection from corrosion.

Wurth HHS2000 is centrifuge-resistant on turning and rotating parts.

Great material compatibility, O and X-ring compatible, as well as plastics with neutral behaviour on painted substrates.

Resistant to water splashes, salt water, weak acids and alkalis.

Silicone-free, resin-free and acid-free!

Notice:

Resistance to high pressure loads

The HHS 2000 lubricating film remains active and does not tear off despite the high-pressure load and shearing motion of the base body. Reliably separates the counterpart-body from the base body and thus ensures optimum wear protection at higher pressure loads. This is only possible for dirt-free lubricating points.

Application area:

Suitable for universal lubrication and for high pressure loads e.g. shifting, accelerator and clutch linkages, Bowden cables, pins, joints, hinges, reversing levers, lock strikers, drag link ends, sliding rails, chain wheels, toothed racks and open gearwheels.

Instructions:

Shake the can before use, spray the parts required and let it take effect briefly. After you have finished with the product, for safety please turn it upside down and spray until totally empty.